Product Details:
Payment & Shipping Terms:
|
| Material: | Carbon Steel | Speed: | 600m Per Minute |
|---|---|---|---|
| Max Rolling Force: | 1400T |
1150mm 6 High Cold Rolled Mill Plc Control 1400T Rolling Force
1, Incoming specification
Material: Mild steel
Thickness: ≤2.0mm
Width: 700～1000mm
ID of coil of strip: φ508
OD of coil of strip: 1900mm
Maximum coil weight: 20t
2, Finished product specification
Thickness: 0.14-0.18mm
Width: 700～1000mm
ID of coil of strip: φ508
OD of coil of strip: φ1900mm
Maximum coil weight: 20t
Section 2 Composition of the Machine Set
1, This machine set is a HC reversing cold mill set with advanced design and high quality equipments, which can produce competitive products. It is an automated equipment complex integrating machinery, electrical control, instruments and hydraulic system, consists of the coil loading larry, pay-off reel, pinch straightener, right tension reel, unloading device, front device, 1250mm Six-roller Reversing Cold Mill Set, back device, left tension reel, unloading device, roll replacement device, hydraulic system (hydraulic station, thin-oil lubricating station)etc.
2, Equipment level
2.1 Whole digit AC speed regulation, silicon controlled power supply; (machine set) PLC control
2.2 Hydraulic pressing up, AGC thickness control
2.3 working roll positive bend roll shape adjustment
2.4 CPC control for uncoiling alignment
2.5 Quick roll change of working roll
2.6 Reeler accurate stop, number of turns memory, strip tail automatic deceleration and stop.
2.7 Automatic control and digital display of rolling speed and tension
2.8 Quick adjustment of rolling line elevation pressing down screw
2.9 Oil gas lubrication of rolling mill bearings
2.10 Fault diagnosis, alarm, strip break protection
Section 3 Main Technical Parameters
Rolling mill specifications: φ380/ φ1050×1150mm
Maximum rolling force: 14000KN
Maximum roll torque: 95KN.M
Rolling speed: ≤600m/min
Strip threading speed: 18m/min
Maximum uncoiling speed: 240m/min
Maximum reeling speed: 600m/min
Uncoiling tension: 50～5KN
Reeling tension: 120～12KN(V＜400m/min)
70～7.0KN(V≥400m/min)
Diameter of working roll: 380～350mm
Diameter of back-up roll: 1050～1000mm
Roll body length of working roll: 1150mm
Roll body length of backing roll: 1100mm
Maximum aperture width of work roll: 20mm
Process flow of coolant system: 5000L/min
Working pressure of AGC station: 21 Mpa
Working pressure of hydraulic system (roll curve, balance, traverse motion): 12～18Mpa
General hydraulic transmission: 10 Mpa
